Ultrafiltration (UF) systems are highly effective physical filtration methods based on membrane technology, especially used in the treatment of surface waters, well waters, and wastewater recovery projects. 

 The pore diameters of ultrafiltration membranes are generally between 0.01 and 0.02 microns. 

 This microscopic pore structure physically blocks all suspended solids, macromolecules, turbidity (reduces the NTU value to near zero), colloids, and most importantly, all pathogenic microorganisms such as bacteria, viruses, and cysts in the water with an efficiency close to 100% without the need to use any chemicals. 

 UF systems stand out as an excellent pre-treatment solution, especially before Reverse Osmosis (RO) systems. 

 This is because they lower the SDI (Silt Density Index) value of the water, preventing the clogging (fouling) of RO membranes and doubling their lifespan. 

 Our system, which consists of membrane modules in a Hollow Fiber structure, can perform filtration from outside to inside or inside to outside. 

 Thanks to automatic "Backwash" and "Chemically Enhanced Backwash" (CEB) processes applied periodically, the pollution accumulated on the membrane surface is quickly cleaned, and system performance is constantly kept at the highest level. 

 Our Ultrafiltration systems, which can successfully treat very high-flow waters even in very small areas thanks to their modular structure, minimize energy consumption due to low operating pressures while offering sustainable water management with high output water quality.